So how does power tools battery reconditioning work?
Basically, these tools make use of nickel cadmium or NiCad batteries, which can be recharged for a couple of times before they eventually die. However, even if the battery "dies" it can still be revived through a process called battery reconditioning, rendering it useful once again. Reconditioning should ideally be done prior to the death of the battery's death, at least once every month in order to extend the battery's life.
How does one recondition power tool batteries?
These batteries can easily be reconditioned, and you can take this up as a DIY project anytime. To start this DIY project, you will only need two things - an electrical charger and an outlet. Now that you have these two things, you can start your DIY project. Here are some tips to keep in mind once you start the DIY project.
To start, turn on the tool until it completely discharges. Once it dies out, charge the battery and then charge it as you would on a normal basis. Charge the battery until its charge is full.
Now that it is full, use it on the tool again; turn the power tool once again. Check the time it takes to drain it out. Does the same procedure until you notice the battery's life increase?
The battery's life span may not eventually increase right during the first reconditioning process, but by doing the same thing every month, you can increase your battery's life span substantially.
Reconditioning a battery is a very easy DIY project. In fact, after reading through the following instructions on how to recondition a power tool battery, you will be amazed at just how easy it is. There are just two things you need when reconditioning a NiCad battery: a battery charger and an electrical outlet. Once you have these two things prepared, here's how you can get your battery back in shape.
As soon as the battery has been fully charged, run the power tool again to check the battery's capacity. If you notice that it has not yet returned to full working capacity, you may have to repeat the entire power tool battery reconditioning process once or twice. However, if you notice that the battery's performance has improved as compared to when it has not gone through the reconditioning process, it is best to wait a month before reconditioning it again. Too much discharging and recharging may cause undue strain on the batteries. If your batteries continue to deteriorate even after monthly reconditioning, it may already have run through its lifespan and that is when buying a replacement becomes the best option.
About the Author
No comments:
Post a Comment