It is now almost more 15 years that industrial users have been tied hard with the old and vulnerable floppy drives. These industrial machines are very expensive and cannot be upgraded frequently. The upgrade cost of these industrial automated machines like Tajima, Barudan and several other embroidery machines is very costly, that even a good firm will think thrice to get the same upgraded to suit the modern conditions.
As of today we all know that USB pen drives have made our life a lot simpler than what the industrial users are even facing today. We can simply do a cut copy paste of any file of any size ranging from 1 kb to 128 gb in just few seconds. These usb devices are so rugged that we can trust them to last long. They are well functional even in dusty and dirty environments. On the other hand it's just reverse in case of floppy disk drives.
Some intelligent manufacturers have been successful in emulating a floppy disk drive over usb port. They have developed a floppy drive to usb converter. Initially they were successful in the process of converting most of the machines like Knitting, Weaving, Embroidery, CNC , Wire cutting , Diamond Cutting , Musical Keyboards and many more products which were working on standard 34 pin floppy drive interface and 5 volts operations. The floppy disk drive to usb converters were designed in such a way that even a layman could easily fit and install the floppy disc to usb emulators. The intelligence of the manufacturers can very well be guessed keeping in mind the physical look out of the floppy drive to usb converter was kept same as traditional floppy drive. Even the fitting screws were supposed to come on same place as of old floppy drives.
Initially floppy drive to usb converter with 26 pin zif connectors was seemed to be distant dream for few industrial users using machines. Now after 2 years of development on 34 pin interface of floppy drive to usb converters, few manufacturers have come with great news of relief of industrial users those are working on 26 pin interface of floppy drives. These drives are being used on embroidery machines like Barudan etc.
Now users using these versions of old floppy drive can simply buy the newly floppy disc to usb emulators and replace them with currently installed half height 26 pin floppy drives.
About the AuthorWriter is an expert on floppy drive to usb . If you are interested to know more about floppy disk drive to usb or floppy to usb, then Visit this site Floppytousb.net
No comments:
Post a Comment