Showing posts with label flooded lead acid battery. Show all posts
Showing posts with label flooded lead acid battery. Show all posts

Sunday, October 9, 2011

A Guide to Flooded Lead Acid Battery

Before we talk about the common usage, firstly we should define what flooded lead acid battery is. Lead Acid Batteries are the eldest of the modern batteries. These batteries were first invented in the late 1800s, and have evolved from the wooden box models of yesteryear to the sleek plastic boxed batteries we purchase today. Based on lead plates, and a sulfuric acid solution, the chemistry has proven over time to be stable, reliable, and fairly safe. VRLA, or valve regulated lead acid batteries, are usually flooded batteries, and the venting is there to handle the generated dangerous explosive gases, hydrogen and oxygen.

Flooded Lead Acid Batteries are standard equipment on many manufacturer boats, yachts, and watercraft. Both AGM and Flooded lead acid batteries are amperage tolerant. AGM and Flooded Lead Acid Batteries are designed to push heavy amperage loads without detrimental effects to the battery. Both AGM and flooded batteries are able to be charged with high output alternators on those motors. These standards and the battery's ability to cope in this environment make either a solid choice over a GEL battery.

Flooded lead acid batteries have been around longest, used the longest in solar and wind electric systems. That's why they are still used in the majority of wind/solar energy systems. The price performance value is because flooded lead acid batteries have the longest life and the least cost per amp-hour of any of the choices. However, they require regular maintenance in the form of watering, equalizing charges and keeping the top and terminals clean.

A flooded lead acid battery is a conventional, unsealed battery that is commonly found in many vehicles. These batteries have caps on the top which can be removed in order to check and replenish the electrolyte level if necessary. Like all batteries, a flooded battery may drain or die from time to time. When this happens, it requires recharging as soon as possible. The longer you allow it to remain discharged, the greater the likelihood for the battery to sulfate, or degrade. Sulfation will eventually ruin the battery. Good maintenance will improve system performance and greatly reduce battery bank replacement costs.

About the Author

Hi, this is lissa, and I am try to tell something about leoch battery, such as lead acid battery, GEL battery, VRLA battery, UPS battery, motorcycle batteries, golf cart battery, car battery, etc, hope you like it. And if you currently have some suggestions or advices, I am really appreciate if you tell me.

Saturday, July 23, 2011

How to clearly define AGM batteries?

AGM Batteries, one of VRLA battery, are comprised of lead plates, Advanced Glass Mat, and acid, inside the battery case. Each plate is wrapped in a separator to avoid short circuits, then a piece of glass matting is put on each side of the plate, then another plate is added, and the AGM matting is installed again. The plates, mats, and separators are installed into the battery by hand, soldered together, then flooded with acid. Nearly all AGM batteries are recombinant, meaning they can recombine 99% of the oxygen as well as hydrogen. There is nearly no water is loss.

The primary step is to understand the battery classification structure and where AGM batteries fit into it all VRLA batteries are the type of battery of which AGM batteries are a sub-class The VRLA battery is a category of minimal maintenance lead-acid rechargeable batteries, and its acronym stands for valve-regulated lead-acid battery Due to their construction, VRLA batteries don't require water to be put into the cells on a regular basis The technology behind these batteries has been refined over time, as these specific types of batteries have been commercially available now for about a century

Besides, the charging voltages are the similar as for other lead-acid batteries. Even below severe from charge conditions, hydrogen emission is below the 4% such as for aircraft as well as enclosed spaces. The low self-discharge of 1-3% per month admits long time storage before recharging. The AGM costs 2 times that of the flooded version of the similar capacity. Because of durability, German high performance cars use AGM batteries in favor of the flooded type.

Advantages

•     Inexpensive as well as simple to manufacture.

•     Mature, reliable as well as well-understood technology – overce utilized correctly, lead-acid is durable as well as provides dependable service.

•     The self-discharge is between the lowest of rechargeable battery cognitive systems.

•     Capable of high discharge rates.

Limitations

•     Low energy density – poor weight-to-energy ratio limits use to stationary as well as wheeled applications.

•     Cannot be stored in a discharged condition – the cell voltage should never drop below 2.10V.

•     Allows overly a limited number of complete discharge cycles – well suited as for standby applications that require overly occasional deep discharges.

•     Lead content as well as electrolyte induce the Toshiba pa3594u-1brs battery environmentally unfriendly.

•     Transportation restrictions over flooded lead acid – there are environmental concerns concerning spillage.

•     Thermal runaway can occur whenever improperly charged.

Comparing to gel battery, AGM Battery will always beat a GEL battery for marine applications. AGM batteries are generally far more efficient than are flooded lead acid batteries. This is important when determining the cost to charge and discharge the batteries. Generally an AGM battery will give you between 80-90% of the power pushed into the battery, back. On the other hand, flooded lead acid batteries typically have efficiencies in the 40-60% range. The bottom lines here are time and money. Basically you spend more to charge a flooded battery than you do an AGM. This translates to money as generators eat gas, alternators rob horsepower from the engine, and battery chargers eat kilowatts. The real tragedy is that you get less of that power back from the flooded battery than you do with an AGM battery.

In simply terms, AGM Batteries are safer than GEL or Flooded Batteries - No Acid Leaks, no explosions. AGM Batteries are more efficient than either Flooded or GEL battery. AGM Batteries are able to be charged or discharged faster than Flooded Batteries (due to low internal resistance). AGM Batteries are the same voltage as their flooded cousins - allows for plug and play.

Source: www.leoch.com

About the Author

Hi, this is lissa, and I am try to tell something about leoch battery, such as lead acid battery, GEL battery, VRLA battery, UPS battery, motorcycle battery, golf carts battery, car battery, etc, hope you like it. And if you currently have some suggestions or advices, I am really appreciate if you tell me.

Thursday, July 21, 2011

Can Sealed Lead Acid Convert to Flooded Lead Acid Battery?

I have a sealed lead acid battery of 7.5 Ah from my computer UPS. It shows diminished performance but charges to 13.2 volts. I think the liquid inside it has evaporated. I am thinking of converting it to a flooded lead acid battery and use it for my emergency lantern. Can I convert the sealed lead acid battery to a flooded one by pouring battery acid in it? Then I could maintain it by adding water from time to time. Is there any risk? Will the battery work? I have an uncertified source to charge at 17 volts 1 amp which is maintained at 14.6 volts when connected to battery.

Someone said, "You can. The caution is when you remove the vents, to be sure to plug them to protect from spills. The innards of a SLA are much like a standard LA battery. The fill holes are plugged with rupture vents. You CAN remove the vents and fill the battery with water. You shouldn't have to add acid, just water. Use your desulfinator +charger to get the sulfates re-constituted into the electrolyte."

Another person said that I can't convert it if it's a gel cell. He told me that first check the manufacturer's datasheet to make sure that it is an SLA and not a gel cell.

Then I told him that it's definitely a sealed Lead Acid battery. if I just pour water to fill the cells then it would be too dilute because the is just enough acid to make it work in dry condition, so I think I should add acid so I make it to work as flooded lead acid battery.

One of my friends said, "If you change the specific gravity of the battery, it won't work properly. Hard to say how much water may have evaporated. You could try adding just enough distilled water to cover the plates, and then a little acid. Charge the cell. Keep reading the specific gravity while you are desulphating it. If the specific gravity at some point exceeds about 1.26, you will need to add more distilled water.
If you simply add acid, you may wind up with electrolyte that is much too high in specific gravity after the lead sulphate has been dissolved back into the solution. Monitoring the specific gravity is really the only way you can get an idea of where you are, and where you need to go."

One net friend said with a smile, "Adding acid is VERY rare. I work with hard used LA batteries every day, and I have never had to add acid in the course of standard use. If you spilled a new battery, maybe you can. But if the water evaporated, the electrolyte would become very acidic and become sulfate rather quickly. Add distilled water and put on charge."

Everyone had their own opinion, and finally I found it is so difficult to do that. It didn't mean that I would give up. Just go for some expert guide to finish the hard work. I believed that I would convert the sealed lead acid to flooded lead acid battery at last.

Source: www.leoch.com

About the Author

Hi, this is lissa, and I am try to tell something about leoch battery, such as lead acid battery, GEL battery, VRLA battery, UPS battery, motorcycle battery, golf carts battery, car battery, etc, hope you like it. And if you currently have some suggestions or advices, I am really appreciate if you tell me.